Why do you downshift to go faster?

What is the purpose of downshifting? Downshifting is necessary in order to put the car in the optimal gear to maximize acceleration when the time comes to squeeze on the throttle after we have exited a corner.

jonathangoring.com - The Lost Art of Downshifting - Jonathan Goring Motorsports

Does a pianist follow a singer?

Practice with a singer on piano — much as it is often done on guitar like strumming — so, you will follow the singers lead and not: Need to play...

Last updated Dec 1, 2021

Can you learn piano by ear?

Any student is able to learn to play piano by ear, all it takes is a lot of practice and several different exercises and techniques to train your...

Last updated Aug 12, 2022

Promotion

The Purpose of Downshifting

Let’s start with this question. What is the purpose of downshifting? Downshifting is necessary in order to put the car in the optimal gear to maximize acceleration when the time comes to squeeze on the throttle after we have exited a corner. Contrary to popular belief, downshifting shouldn’t be used to slow the car down. That’s what the brakes are for. It is the goal of the performance driver to get the downshifts done in a way that doesn’t affect the balance of the car. Ever seen a car spin out suddenly in the brake zone of a corner? It usually isn’t the result of too much rear brake strength, but rather the result of an uncoordinated downshift. Downshifting shouldn’t ever upset the balance of the car, never mind spin it out. Depending on the corner type, downshifting may be done before or after turn in. Downshifting ideally occurs somewhere between the brake point and the turn in point. Providing the engine isn’t over revved, the sooner you can get those downshifts done the more you can focus on the release of the brake.

Different Types of Transmissions

In today’s modern era we have many different types of transmissions and therefore many different ways to change gears. We have everything from fully automatic where the car’s computer has exclusive control over gear selection to the old school H pattern gearbox where the driver has ultimate control. Regardless of how the shift occurs, whether manually or automatically, that shift will have an effect on the traction of the drive wheels. This is something the performance driver needs to be aware of. Most prefer some type of manual transmission because the driver has full control over gear selection. This is ideal in performance driving because we can maximise the grip of the drive tires by getting the shift done smoothly. H pattern gear boxes a common favorite. This is where the car has a clutch pedal and any gear can be selected at any time. H pattern transmissions are usually “slower” when it comes to lap time but are way more fun in my opinion! Sequential gear boxes are another common type of transmission. This is where the driver can go up and down 1 gear at a time with either paddles behind the steering wheel or a gear shift lever in the center console that is pushed back and forth.

Is D# the same as E flat?

Is E flat the same as D sharp? Well, yes and no. Between D and E is a half-tone that can be called D sharp or E flat. These two notes are...

Last updated Apr 4, 2020

What is a great entrance song?

20 Great Entrance Songs That Sports People Arrive Out To During Competition Eye Of The Tiger – Survivor. ... Red Hot Chilli Peppers – Can't Stop....

Last updated Sep 12, 2019

Promotion

“Rev Match” Your Downshifts

Regardless of what type of transmission your car has, let’s go through some fundamentals. Let’s say you’re driving down the road at 60mph in 4th gear. Your engine speed (RPM) would be a certain number, let’s say 5000 in this case. But what if you were doing the same 60mph but in 3rd gear? Your engine RPM would be higher, let’s just say this number is 5900. If you were to suddenly put the car in 3rd gear the engine would be forced to rev higher by the momentum of the spinning tires and weight of the car. In addition, the drive tires would also be forced to slow down to equalize the road speed with the engine speed. You can imagine how this would make a huge instability in the car, and in a rear driver car it’s essentially the same thing as ripping up the handbrake. No Bueno! The answer is this. We want to “rev match” the engine speed with the transmission (road) speed before we do our downshift. If we increase the engine speed to the RPM of what it would be once we put it in the lower gear, we would be rev matched. In order to do this, we would need the clutch to be pushed in and/or the car in neutral. We then would need to roll our ankle over, “blipping” the throttle while simultaneously holding the brake. At this point if we do the downshift in a timely manner the revs will be matched and that downshift will be super smooth, not upsetting the balance of the car.

How Rev Matching Improves Braking Performance

By matching our road speed with our engine speed, the downshift will not only be super smooth but it will improve our braking performance as well. This is because the more closely the driver matches the engine speed to the road speed, the less upset the drive tires will be when the downshift occurs. With such smooth downshifting the driver is able to press the brake pedal harder over the course of the shift and decelerate over a shorter distance, optimizing wear and tear on the drive line and producing a better lap time by being able to go deeper under braking.

What is Beethoven's most famous sonata?

Moonlight “Moonlight” is perhaps the most famous of Beethoven's sonatas. It was another Ludwig — Ludwig Rellstab, a music critic — who likened the...

Last updated Jul 8, 2021

What chord can you substitute for F?

How To Practice The Easy F Chord on Guitar First, make a folk-style C chord. ... Move your middle finger up one string to the 3rd string (still...

Last updated Sep 23, 2022

Promotion

With sloppy downshifting, the driver has to deal with the equivalent of the hand brake ripped up with each subsequent gear change as the drive tires lock up with each clutch release. It’s also much harder on the car and increases the rate of mechanical failures.

What Is Heel/Toe Downshifting & Why Do We Use It?

Heel/Toe downshifting is a technique that many high performance/race drivers use to allow simultaneous braking, throttle and clutch action while downshifting. Heel/Toe downshifting is only used in a fully manual transmission with a clutch pedal. Unfortunately, the human body only comes equipped with 2 feet but cars that are manual transmission have 3 pedals. Therefore, we must adopt a technique that will allow us to manipulate all 3 pedals with our 2 feet. And, this technique must allow for precision adjustments on all 3 pedals independently of one another. As you can imagine, this can get pretty tricky quick because the 3 pedals require different inputs to get the desired result of a timely, smooth downshift. There are two types of H/T downshifting which have a slightly different order of operation.

Single Clutch H/T Downshift

Depress Clutch Shift To Lower Gear Blip Throttle

And Then

Clutch Release

I use the single clutch H/T downshift in shorter brake zones that require only one downshift.

Double Clutch H/T Downshift

The double clutch H/T Downshift works a little bit differently. It goes like this: During the process of either style of downshifting, I use a special technique that assures maximum sensitivity on both pedals. This enables the driver to manipulate both the brake and throttle as separate entities, something that is very difficult to otherwise coordinate. Learn the secret by downloading the free PDF below!

jonathangoring.com - The Lost Art of Downshifting - Jonathan Goring Motorsports

What are the black keys on the piano for?

The black keys on the piano are known as the flat and sharp keys. In technical terms this means they make a note half a step (or a semitone) lower...

Last updated Oct 21, 2022

Why did Beethoven go deaf?

Why did Beethoven go deaf? The exact cause of his hearing loss is unknown. Theories range from syphilis to lead poisoning, typhus, or possibly even...

Last updated Apr 20, 2022